Finally! I have the pics available of the super 8 blimp (M2K-S8) and are available at http://www.darkcastleproductions.freeservers.com.
This blimp will cut out about 85% of your camera noise (depending on the camera). I ran it six feet away from a shotgun mic. indoors and you couldn't hear anything.
Again, these blimps are custom made to YOUR camera. Email me for details if your interested.
Thanks!
Phil
PICS OF BLIMP AVAILABLE!
Moderator: Andreas Wideroe
-
- Posts: 374
- Joined: Wed May 01, 2002 4:55 pm
- Location: NYC - Queens
-
- Posts: 115
- Joined: Wed May 01, 2002 11:09 pm
- Location: Santa Cruz, CA
- Andreas Wideroe
- Site Admin
- Posts: 2273
- Joined: Tue Apr 30, 2002 4:50 pm
- Real name: Andreas Wideroe
- Location: Kristiansand, Norway
- Contact:
Blimp images
Phil sent me some images. I'm posting them here so you all can have a look!
Andreas Wideroe
Filmshooting | Com - Administrator
Please help support the Filmshooting forum with donations
Filmshooting | Com - Administrator
Please help support the Filmshooting forum with donations
blimps
These pics will give everyone an idea of what the completed products looks like. Obviously there will have to be some cosmetic changes to accomodate variouse cameras, however the basic body will look like this.
Also remember, that these are custom to your camera. So, if you need access to something - lets say your footage counter - we can make the appropriate changes.
As far as the Nizo 4080 and 6080 models are concerned, I doubd very seriously that they'd need one because they are already so quiet. I've never had to quite my 4080. But is someone wanted one, I could oblige.
Thanks a bunch guys and gals!
Phil F.
Also remember, that these are custom to your camera. So, if you need access to something - lets say your footage counter - we can make the appropriate changes.
As far as the Nizo 4080 and 6080 models are concerned, I doubd very seriously that they'd need one because they are already so quiet. I've never had to quite my 4080. But is someone wanted one, I could oblige.
Thanks a bunch guys and gals!
Phil F.